Additive Industries present its MetalFAB1 during Formnext Forum in Tokyo

11 September, 2019
Yesterday during the Formnext Forum in Tokyo, Harry Kleijnen, our Key Account manager, and Mike Goh, our General Manager Asia Pacific, presented our MetalFAB1 System to the Japanese market. They explained how to Accelerate Industrial Additive Manufacturing with process automation and integration of functionalities.  

Additive Industries adds metal 3D printing veteran Lars Ryberg to its Sales Team

05 September, 2019
We are very proud to announce that Lars Ryberg, until recently as a Senior Sales Director responsible for Arcam and Concept Laser in various countries at GE Additive, joins Additive Industries with over 12 years of experience in metal additive manufacturing servicing Aerospace-, Medical implants-, and other industries. From the new Process & Application Development Center in Filton (UK), Lars will be primarily responsible for Sales in the United Kingdom and Ireland and later he will expand his territory to the Nordics (Denmark, Norway, Sweden, Finland) where he feels right at home being born in Sweden. We are very happy to welcome Lars in the Additive Industries team! Please read the entire Press Release and find a picture of Lars Ryberg on our Press Page.

Additive Industries largest aerospace customer expands installed base to 10 before the year-end

27 August, 2019
We are very proud to announce the purchase of 6 MetalFAB1 systems by a prestigious aerospace company located in California. This firm order validates the Additive Industries’ concept of production-based metal powder bed fusion systems for maximum overall equipment efficiency. When the order for six machines arrives at the customer site later this year, it will bring the installed base of MetalFAB1 systems to 10 with more possible in 2020. This customer was able to consolidate approximately 700 kilograms of powder in the month of June with the 4 laser MetalFAB1 systems currently in operation. The application represents an inflection point in metal powder bed fusion part production where candidate parts were typically limited to fist size volumes to meet ROI calculations. With the MetalFAB1 systems this customer is able to cost effectively produce over 420 [mm] diameter by 400 [mm] tall parts weighing a whopping 180 kilograms. Please read our press release and see different visuals of the MetalFAB1 system on our Press Page.

APWORKS and Additive Industries advance to series production of certified parts

13 August, 2019
APWORKS located at the Airbus headquarters close to Munich was Additive Industries’ first customer and has extensively tested the MetalFAB1 Beta system since its installation in March 2016. The partners have jointly decided to now move to the next phase of industrial additive manufacturing: certification and series production. APWORKS, a 100% subsidiary of Premium AEROTEC and part of Airbus, main focus in Taufkirchen is on development and production of complex and advanced applications for metal additive manufacturing in non-regulated industries such as automotive, robotics or tooling, as well as new material and software development. The collaboration on series production of certified applications for the aerospace industry will be done closer to actual production at the new Additive Industries Process & Application Development Center on the aerospace campus in Filton, close to Bristol. Please read a press release on our Press Page and watch the video here.

Additive Industries becomes the finalist in two categories at TCT Awards 2019

30 July, 2019
Following some strong competition and an intensive review by the TCT expert advisory board,Additive Industries, in cooperation with Sauber Engineering, has been voted as a finalist for the Automotive Application Award for the TCT Awards 2019 with the entry 'Metal F1 Wind Tunnel Components'. At the same time we were delighted to getvoted as a finalist, together with K3D, a wholly-owned subsidiary of the Kaak group, for our entry 'Industrial Robot Dough Cutting Knife'. Each of the finalists will be sent in full to a selection of the TCT Expert Advisory Board where the judging process will commence. The judges will collectively use their expertise from varied industries to pick a winner from each category. Winners will be announced on the evening of Wednesday 25th The National Conference Centre, UK.

Extension of Additive Manufacturing JIPs and deadline for new partners to join JIPs

05 July, 2019

In January 2018, 11 companies started two seamlessly aligned Joint Innovation Projects (JIPs). The group has grown to 18 partners by June 2019. The JIPs goal is to develop a guideline for the qualification of spare parts produced by Additive Manufacturing technologies, and an accompanying economic model, to be used in the Oil & Gas and Maritime industries. Recently, the JIPs have been extended till December 2019 to gain learnings from a 2nd round of part production and to allow maturing of draft guideline through the use by the partners.

F1 team of Alfa Romeo Racing strengthen Technology Partnership with Additive Industries

26 June, 2019

On behalf of Alfa Romeo Racing, Sauber Engineering, like the F1 team part of the Sauber Group and using the technology, have ordered its 4th multi-module, 4-laser MetalFAB1 Productivity system

Stéphane Escalier as Business Development Director for France

17 June, 2019

Global sales team benefits from extensive international aerospace expertise

K3D-AddFab scales for industrial additive manufacturing in high tech and aerospace

29 March, 2019

AddLab partners continue collaboration to increase capacity in 3D printing for series production

Additive Industries shortlisted for 2019 3D Printing Industry Awards

25 March, 2019

Additive Industries wins first MetalFAB1 order in China

21 March, 2019

Maritime Equipment Technology Institute of Jiangsu University of Science & Technology to use Dutch 3D metal printing technology for production of LNG heat exchangers

K3D and Obasogie Okpamen winners of Design for Additive Manufacturing Challenge 2019

20 March, 2019

Winning designs of Additive Industries contest demonstrate unique industrial capabilities of 3D metal printing

Additive Industries at AMUG 2019, the world’s largest user meeting of additive manufacturing technology professionals

04 March, 2019

Coverage of Asia Pacific region is taking shape with launch of partnership at TCT Asia

21 February, 2019

Additive Industries appoints Sinsun-Tech agent for China

Additive Industries' Technology Partner Alfa Romeo Racing succesfully launches C38

18 February, 2019

Extension Early Bird discount 7th Additive World Conference

12 February, 2019

Great news! Due to big interest in the 7th edition of the Additive World Conference, the early bird ticket deadline has been postponed up to and including Tuesday, February 19!

Additive Industries secures € 10M for international expansion

11 February, 2019

Additive Industries has secured a EUR 10 Million loan from BOM Brabant Ventures and existing shareholder Highlands to accelerate the growth towards a worldwide top 3 position.

Finalists Design Challenge 2019 accelerate in industrial 3D printing

08 February, 2019

Professionals and students redesign products with broad range of benefit

7th Additive World Conference, March 20 & 21, 2019

10 January, 2019

We are proud to announce that we are organizing the 7th edition of our annual Additive World Conference on March 20-21, 2019, in Eindhoven, The Netherlands.

Additive Industries appoints Mike Goh General Manager for Asia Pacific hub

13 December, 2018

Process & Application Development Center in Singapore lead by experienced business development veteran

Additive Industries partner in GKN Aerospace Global Technology Center in Bristol

06 December, 2018

GKN Aerospace announces new £32m Global Technology Centre in Bristol on additive manufacturing (AM), advanced composites, assembly and industry 4.0 processes

Additive Industries launch of Singapore PAD Center Final

23 November, 2018

Process & Application Development Center launched during visit of the Singapore President to Eindhoven.

Intech order marks Additive Industries expansion to Asia

20 November, 2018

At the last day of FormNext, the number 1 global tradeshow for 3D printing in Frankfurt, Intech has confirmed its first order of the Additive Industries MetalFAB1 system.

Air Liquide and Additive Industries launch partnership for industrial 3D printing

15 November, 2018

During FormNext, the number 1 global tradeshow for 3D printing in Frankfurt, Air Liquide and Additive Industries have announced intensify their long term relationship and enter into a professional partnership.

Volkswagen selects Additive Industries’ MetalFAB1 for industrial 3D metal printing future

13 November, 2018

At the opening of FormNext, the number 1 global tradeshow for 3D printing in Frankfurt, Volkswagen and Additive Industries have announced they have entered into a long-term partnership to additively manufacture advanced tooling and spare parts for the Volkswagen Group.

Additive Industries launches 5th edition of Design Challenge during Dutch Design Week

25 October, 2018

During the Dutch Design Week in Eindhoven, the largest design event in Northern Europe, Additive Industries has launched its fifth edition of the Additive World Design for Additive Manufacturing Challenge. Professionals and students are invited to (re)design products dedicated for 3D metal printing.

3rd Dimension accelerates industrial 3D metal printing with Additive Industries

22 October, 2018

During the Additive Industries partnership event at the Formula 1 race in Austin, Texas, 3rd Dimension Industrial 3D Printing, one of the leading metal additive manufacturing companies from North America, has confirmed the first order of a MetalFAB1 system to produce large and high quality parts at the highest productivity.

Alfa Romeo Sauber F1 Team installs 3rd MetalFAB1 system and extends technology partnership with Additive Industries

19 October, 2018

5-year Technology Partnership confirms ambition Sauber Engineering to become a leading industrial 3D metal printing supplier.

Dutch Prime Minister, Mr. Mark Rutte, opens new Additive Industries factory

03 October, 2018

Dutch Prime Minister, Mr. Mark Rutte, has opened the brand new factory of Additive Industries in Eindhoven, The Netherlands on October 3rd.

Additive Industries appoints Laser Lines agent for UK and Ireland

25 September, 2018

Additive Industries announces a partnership with Laser Lines Ltd in order to accelerate presence and growth in UK and Ireland.

Honorable Mention for Additive Industries for Dynamic Multi Laser Assignment!

09 August, 2018

After becoming the finalist with its Dynamic Multi Laser Assignment for the TCT Hardware Award 2018, Additive Industries receives an ‘Honorable Mention’ and got included to the list of reasons to visit IMTS!

Dynamic Multi Laser Assignment shortlisted for TCT Award 2018

01 August, 2018

Additive Industries, with its Dynamic Multi Laser Assignment​, is the finalist for the TCT Hardware Award 2018 Non-polymer systems!

Success at the Farnborough International Airshow

27 July, 2018

It was a fruitful week at the Farnborough International Airshow

Additive Industries and LPW sign partnership agreement during Farnborough show

24 July, 2018

Material traceability key in industrial Additive Manufacturing for certified aerospace applications

Additive Industries opens its doors on June 9, 2018

22 June, 2018

On June 9, during the Dutch Technology Week in Eindhoven, Additive Industries opened the doors of its new facility and it was a huge success!

Jan-Cees Santema joins Additive Industries Management Team

01 June, 2018

Additive Industries’ Management Team is prepared for Top 3 ambition and ready for growth

Additive Industries appoints ANÁLISIS Y SIMULACIÓN as agent for Spain

29 May, 2018

Leading supplier of 3D design and manufacturing software solutions will drive the deployment of Dutch industrial metal additive manufacturing technology

Additive Industries at International Trade Show & Conference for Additive Manufacturing, Rapid.Tech

16 May, 2018

Visit the Additive Industries team at an International Trade Show & Conference for Additive Manufacturing, Rapid.Tech 2018, from June 5 – 7 in Erfurt (DE)

MetalFAB1™ system "live" at AMUG 2018!

05 April, 2018

From Sunday April 8 thru Thursday April 12 our team will present on the main stage and in break-out sessions the latest developments on the MetalFAB1™ system, Additive World Platform software and World Class services. Besides the conference programme, the MetalFAB1™ system with 4-full-field lasers will be shown “live” at booth P9

Additive Industries expands to UK with local Development Centre

19 March, 2018

New UK Process & Application Development Centre lead by Dr. Mark Beard

Aidro Hydraulics and Fraunhofer winners of Design for Additive Manufacturing Challenge 2018

16 March, 2018

Winning designs of Additive Industries contest underlines industrialization of additive manufacturing

Additive Industries’ new factory has 7x more space for growth

05 March, 2018

The company moves to new headquarter facilities in home town Eindhoven

Additive Industries presence at Asia-Pacific region

22 February, 2018

In November 2017, Additive Industries announced an ambition to achieve a Top 3 position in metal additive manufacturing in 2022. Active presence in the fast growing Asia-Pacific region is an important part of the Accelerating Industrial Additive Manufacturing plan. This year an Additive Industries Asia Process & Application Development Center is going to be open in Singapore and Additive Industries presence at the key Asian events & conferences is guaranteed!

Finalists Design Challenge 2018 inspire industrial 3D printing

13 February, 2018

Professionals and students redesign products for a broad range of applications

Additive World Conference VI, March 14-15, 2018

18 January, 2018

From March 14 thru March 15, 2018, Additive Industries organises the 6th edition of the annual Additive World Conference in Eindhoven, The Netherlands.

Additive Industries prepares for growth with new Director Operations & Supply Chain

10 January, 2018

Philips Healthcare veteran Paul Simons joins Additive Industries management team

A very Metal Christmas and an accelerating New Year!

22 December, 2017

We hope that 2017 has been just as memorable for you, your colleagues and your loved ones. We are looking back with appreciation for your loyalty and looking forward to accelerate to the New Year together!

The Sauber F1 Team accelerates 3D metal printing with MetalFAB1

30 November, 2017

Additive Industries hands over first industrial additive manufacturing system

Additive Industries' success at FormNext 2017

19 November, 2017

An incredible success of Additive Industries at FormNext 2017!

Additive Industries accelerates towards Top 3 position in metal AM

14 November, 2017

New product launches and partnerships announced in Frankfurt

Additive Industries expands through worldwide agent network

02 November, 2017

Seasoned 3D printing executive Bart Leferink to lead channel partner sales

Additive Industries launches 4th edition of Design Challenge Professionals

27 October, 2017

In order to grow the number of examples and inspire many other industries to develop dedicated applications for industrial 3D printing, Additive Industries is presenting already the 4th edition of the Additive World Design for Additive Manufacturing Challenge.

Additive World Masterclass IV: Design for Additive Manufacturing

19 October, 2017

Only one week is left before the 4th edition of our Additive World Masterclass: Design for Additive Manufacturing will start.

Additive Industries engages AM veteran Shane Collins for US expansion

03 October, 2017

New Process & Application Development Center created in California close to space cluster

Daan A.J. Kersten, Additive Industries CEO, at BNR eyeopener broadcast

26 September, 2017
On Tueaday, September 26, Additive Industries' CEO ir. Daan A.J. Kersten has been interviewd during the BNR Eyeopeners broadcast, on their wonderful accomplishment, the 2nd place of the TOP 100 SMEs. In this interview Additive Industries' CEO talks about their innovation, the MetalFAB1 Process & Application Development Tool, which makes it easier for new print technology users (from the different high-end and demanding markets) to gain their experience with the industrial 3D metal printing. Please click on the link below to be able to listen this interview (in Dutch).

Additive Industries as the finalist at TCT Show in Birmingham

25 September, 2017

On September 26-28, Additive Industries is going to present at the TCT Show 2017 in Birmingham, UK, as a finalist of the TCT Technology Innovation Award

MetalFAB1 Process & Application Development Tool is voted 2nd in Dutch Innovation Top 100

22 September, 2017

Ideal 3D metal printer for companies starting with this technology and the only system that can be upgraded later to a full series production machine for metal additive manufacturing

Additive Industries presents its 3D Metal Printing systems at IAA

08 September, 2017

Dutch industrial additive manufacturing systems will accelerate automotive innovation and enable series production

UK 3D Printing Expert Dr. Mark Beard joins Additive Industries team

05 September, 2017

Former 3T RPD Technical Director becomes responsible for process and application development

Additive Industries cheers for Sauber F1 Team at the Belgian Grand Prix

25 August, 2017

The partnership with Sauber F1 Team underlines the ambition of Additive Industries to become a leading 3D metal printing system manufacturer in demanding markets like aerospace, automotive, medical and high tech equipment.

MetalFAB1 shortlisted for Technology Innovation Hardware for TCT Awards 2017

10 August, 2017

Following some strong competition and an intensive review by the TCT Expert Advisory board, Additive Industries has been shortlisted with its MetalFAB1 for the Technology Innovation Hardware category for the TCT Awards 2017.

Additive Industries is the New Champion 2017

10 July, 2017

Dutch National newspaper Financieele Dagblad has announced that the jury of their 2017 contest to find the most promising young technology companies ‘De Nieuwe Kampioenen’ (the New Champions) selected Additive Industries unanimously as their winner.

12th International AM Conference in Nottingham, UK

07 July, 2017

Additive Industries will present between July 11-13 its 4 laser version of MetalFAB1 industrial metal AM system & MetalFAB1 Process & Application Development Tool at the 12th International Conference on Additive Manufacturing and 3D Printing in Nottingham UK.

Vote for Additive Industries to help us become The New Champion 2017!

28 June, 2017

Additive Industries is proud to be selected one of The Netherlands' 2017 most promising young companies with disrupting products. 8 'New champions' are now battling for a #1 position.

Sauber F1 Team launching customer for MetalFAB1 Process & Application Development Tool

21 June, 2017

Additive Industries and Sauber F1 Team enter into 3 year technology partnership.

Additive Industries at Rapid.Tech 2017

29 May, 2017

Visit us from June 20 thru June 22 at Rapid.Tech 2017, International Trade Show & Conference for Additive Manufacturing in Erfurt, Germany.

Additive Industries lands 1st MetalFAB1 follow-on order

18 May, 2017

Within 9 months after Beta system delivery to Kaak Group, second order is placed for series production.

Launch of 4 full field laser MetalFAB1 and Process & Application Development Tool in USA

19 April, 2017

From May 9 thru May 11 Additive Industries will present at the largest additive manufacturing & 3D printing trade show in the USA - RAPID 2017.

Additive Industries makes 3D metal printing easier and cuts in half printing costs

10 April, 2017

3D metal printers are in demand, but still expensive. Additive Industries developed the first fully automated 3D printer, which cuts in half the printing costs.

GKN and Additive Industries is a perfect match for metal Additive Manufacturing

06 April, 2017

GKN Sinter Metals became the first automotive supplier in the world to begin series production with 3D printing with the MetalFAB1

Additive Industries is one of the finalists of The New Champions 2017

24 March, 2017

Additive Industries is one of the eight finalists of The New Champions (De Nieuwe Kampioenen 2017)

Additive Industries appoints SIMU as Agent for Italy

23 March, 2017

Additive Industries appoints SIMU as its first Agent to accelerate growth in Europe.

Additive Industries presents MetalFAB1 Process & Application Development Tool

21 March, 2017

Additive Industries has presented a new entry-level model of its MetalFAB1 industrial 3D metal printing system.

The winners of Design for Additive Manufacturing Challenge 2017

15 March, 2017

Lareka and Cassidy Silbernagel winners Design for Additive Manufacturing Challenge 2017

Additive Industries Women Lunch

09 March, 2017

On the 8th of March, during the International Women Day, Additive Industries organised its Additive Industries Women Lunch.

Additive World Conference

20 February, 2017

Due to large interest in the 5th edition of the Additive World Conference, the deadline has been postponed up to and including Wednesday the 22nd of February!

A very Metal Christmas and a FAB New Year!

22 December, 2016

As we look back upon the past year, we would like to acknowledge those who have helped us shape our business and made our progress possible. Thanks for a great year, it has been an incredible year for Additive Industries! Our team doubled, ambitious goals have been achieved and we became experiences richer because of the incredible collaborations with our customers and partnerships with our suppliers!

Daan A.J. Kersten speaks about MetalFAB1 system at FormNext

22 November, 2016

Additive Industries CEO Daan A.J. Kersten talks about modular MetalFAB1 system at FormNext in Frankfurt.

Success of Additive Industries at Formnext 2016

21 November, 2016

This year’s Formnext event was another complete success for Additive Industries. The show took place in Frankfurt am Main, on 15–18 November, and the MetalFAB1 system together with Additive World Platform created an overwhelming interest.

Additive Industries wins the annual 'Best Development in 3D Printing' Award!

17 November, 2016

On Wednesday, November 16, in Santa Clara during the 3D Printing USA (a part of the IDTechEx Show), Additive Industries became the USA 2016 winner of the annual 'Best Development in 3D Printing' Award for their MetalFAB1.

GKN Sinter Metals begins automotive series production of metal AM components

10 November, 2016

GKN Sinter Metals has announced it has begun series production of additively manufactured precision automotive parts at its plant in Radevormwald, Germany.

Additive Industries is a part of the Sprout Challenger 50 list!

09 November, 2016

Additive Industries is a part of the Sprout Challenger 50 list of most challenging and innovative companies in the Netherlands. Additive Industries is dedicated to bringing metal additive manufacturing for functional parts from lab to fab by offering a modular 3D printing system and seamlessly...

3D printing and the auto industry published by Automotive World

03 November, 2016

In this Automotive World report, OEMs, suppliers and other leading stakeholders provide insight into how the technology could be used in vehicle production. Suppliers are keen, vehicle manufacturers are cautiously optimistic, and toolmakers sense an opportunity: 3D printing, or...

First Industrial 3D metal printing system developed at the speed of light

02 November, 2016

Three years ago, Additive Industries started developing the first truly industrial 3D metal printing system, building on the mechatronic and system engineering experience of the Dutch Brainport region. In one year a functional model was realised, and one year later, in 2015, a beta version was...

Additive Industries participates in DLL Marathon Eindhoven

10 October, 2016

On Sunday, 9 October 2016, the 33nd edition of the DLL Marathon Eindhoven took place. It was again a fantastic event. Over 24,000 participants stood at the start of the largest one-day sports event of the province of North Brabant. Team Additive Industries participated in the Smeets Estafette...

Additive Industries is the regional winner of the Top 100 SMEs

30 September, 2016

On Thursday, September 29, in cooperation with the Financiele Telegraaf, the Chamber of Commerce has presented (for the 11th time) the rankings with 100 concrete innovations achieved by the Dutch SMEs. Additive Industries became the regional winner of the Top 100 small and...

Additive Industries is a semi-finalist of the Accenture Innovation Awards 2016

08 September, 2016

Additive Industries has reached Top 10 in the Accenture Innovation Awards 2016 program! We are the semi-finalist in the Smart Industry category. Thank you everyone for your support and please keep voting by visiting our concept page at the Accenture Innovation Awards website using the...